Specialty Service
What a Locker Room Floor Needs
A locker room floor coating is a seamless resin system finished with a wet-area non-slip texture and a coved base, so it grips wet feet, resists mildew and chlorine, and cleans without grout lines to hold mold. It replaces tile and its failing grout with one continuous, sanitary surface.
Locker rooms and shower areas are wet, warm and chemically harsh, which is hard on tile and brutal on bare concrete. The floor has to be non-slip when wet, because that is the whole safety case, so we broadcast an aggregate that meets a wet DCOF of 0.42 or higher (the ANSI A326.3 threshold) for a barefoot wet-area finish. It has to resist mildew, mold and chlorine from constant moisture and pool chemistry at a pool-water pH around 7.2 to 7.8. And it has to be seamless with a cove base, so there are no grout lines to grow mildew and no corner seams to fail, the exact failure mode that dooms a tiled locker room over time.
The System We Install and How Long It Takes
We install a seamless epoxy or polyaspartic system at 20 to 40 mils with a coved base 4 to 6 inches up the wall and a wet-area non-slip texture, chemical-resistant to chlorine and cleaning agents. It is our own Duralast system, and it turns a grout-lined tile floor into one sanitary, slip-safe surface with no grout to hold mildew. Fast-cure polyaspartic is tack-free in 1 to 2 hours and returns the room to service in about a day.
Every floor gets the same six-step process: we grind the slab to a CSP 1 to 3 profile, patch cracks and spalls, moisture-test and prime the concrete, apply the base coat, broadcast the chips and seal it with a clear topcoat.
- Seamless epoxy or polyaspartic at 20 to 40 mils.
- Coved base 4 to 6 inches up the wall, instead of a failing tile corner.
- Wet slip resistance at or above 0.42 DCOF.
- Resists chlorine at a pool pH of 7.2 to 7.8.
- Tack-free in 1 to 2 hours, back in service in about 24 hours.
Built for Indiana Winters
Entryways and any unheated vestibule to a locker room or pool building take tracked-in road salt and freeze-thaw at the threshold. We spec those transitions for the cold and chloride so the coating does not scale where wet feet and salt meet cold concrete.
What It Costs
We price every floor in person with a free on-site estimate. The cost depends on the square footage, the slab's condition and moisture, the coating system and build, and any off-hours scheduling. You get a straight, written price before any work starts.
Where We Work
We install locker room floor coating across Fort Wayne, Northeast Indiana and adjacent Northwest Ohio, including Fort Wayne, New Haven, Huntertown, Auburn and the surrounding communities. (See all service areas)
Our General Manager Is on Every Job
Founded in 2014, Duration keeps general manager Dan Diven on-site for every job, with a crew of 10 and 4,500 projects across Fort Wayne and Northeast Indiana, holding a 5.0 rating from 102 Google reviews. This service is part of our commercial floor coating work.
