Patio & Walkway Coating in Fort Wayne, IN

What Outdoor Concrete Coating Is, and Why Indiana Is Hard on It

A patio or walkway coating is a bonded, textured finish that resurfaces worn outdoor concrete into a durable, slip-resistant, good-looking surface. Outdoor slabs in Northeast Indiana take the worst of two things at once: freeze-thaw, where water soaks in, freezes and flakes the surface off, and de-icer salt, which scales and pits the concrete near steps and entries. Add UV that fades a bare or sealed slab, and an untreated patio ages fast. A proper coating seals the surface against all three. We give a free on-site estimate, and most patios and walkways are finished in a day.

The Outdoor Surfaces We Coat

• Patios, resurfaced and sealed so cracks and spalling disappear and the space is ready to furnish.
• Walkways and sidewalks, slip-resistant and salt-resistant for the paths people actually use in winter.
• Front porches and stoops, the first thing a visitor sees, finished to match your entry.
• Steps, coated with extra texture for grip where a fall is most likely.
• Entryways and landings, where road salt tracks in and does the most damage to bare concrete.

Freeze-Thaw, Salt and Sun: What We Seal Out

• Freeze-thaw spalling. Surface water freezes, expands and pops the top layer off. A flexible, sealed coating keeps the water out, so the cycle cannot lift the surface.
• De-icer and road salt. Chloride scales and pits bare concrete, especially on steps and entries. Our coating resists it, so you can keep the ice off without wrecking the slab.
• UV fading. The Duralast polyaspartic topcoat is UV-stable, so a south-facing patio keeps its color instead of chalking and fading.

Resurface, Don't Replace

If your patio or walkway is structurally sound but cracked, pitted, stained or dated, resurfacing costs far less than tearing it out and repouring, and it is done in a fraction of the time. We repair the cracks and spalls first, then resurface, so the old damage is gone rather than telegraphing back through the finish. We recommend replacement only when the slab itself has heaved or failed, and we tell you honestly which yours needs.

How We Coat a Patio or Walkway

Slip Resistance and Color

Outdoor surfaces have to grip wet or icy feet, so we broadcast a texture into the finish, more on steps and entries, a smoother finish where you want a patio to feel like a room. You choose the color and blend to match your home, from a natural stone-style look to a solid color or a decorative flake.

The Coating System We Use Outdoors, and Why

For outdoor concrete we build a polyaspartic system rather than a bare epoxy. Epoxy ambers and chalks under UV, so it belongs indoors. Polyaspartic holds its color in direct sun, stays flexible through freeze-thaw movement, and cures fast, walk-ready in about 24 hours and back in service inside a day or two, which matters on a walkway or entry you cannot close off for a week. We broadcast an aggregate for grip and finish with a UV-stable clear topcoat. On a badly spalled slab we build a resurfacing overlay first, feathering it flush with the surrounding concrete, then coat over the repaired surface so the old damage does not read through.

When to Coat Outdoor Concrete in Indiana

Coatings and concrete repairs cure most reliably in mild, dry conditions, and fresh concrete repairs need time, a full cure runs about 28 days. That makes late spring through fall a strong window in Indiana, so the surface is fully cured and sealed before the first hard freeze. Because the polyaspartic itself cures in about 24 hours, we can coat later into the fall than a slow epoxy allows, as long as the slab is sound and dry. We schedule around the weather so your patio is done right.

What a Patio or Walkway Coating Costs

• Square footage of the surface.
• Condition, how much crack and spall repair it needs.
• Resurface vs coat, a badly damaged slab needs a resurfacing overlay.
• Texture and color you choose.

We price it in person with a free on-site estimate.

Where We Install Patio & Walkway Coatings

We coat outdoor concrete across Fort Wayne, Northeast Indiana and adjacent Northwest Ohio, including Fort Wayne, New Haven, Huntertown, Auburn, Leo-Cedarville, Aboite and the surrounding communities. (See all service areas)

Caring for Your Coated Patio

Maintenance is simple. Sweep off debris, rinse it down, and clean spills with a mild cleaner. Keep de-icer off where you can, though the coating resists it, and avoid metal shovels that could gouge the finish. There is no resealing every year the way bare concrete needs.

Our General Manager Is on Every Job

Founded in 2014, Duration keeps general manager Dan Diven on-site for every job, with a crew of 10 and 4,500 projects across Fort Wayne and Northeast Indiana, holding a 5.0 rating from 102 Google reviews.